PDA

View Full Version : Steel Horse Bikini Top



JBs X
07-06-2009, 01:36 PM
A friend of mine gave me a Steel Horse Bikini Top for my '02 TJ, but there were no mounting instructions for the windshield channel. I assume it mounts at the very top above the windshield, is this correct? Does anyone know what size screws I need to mount the channel? Thanks.

2002wranglerX
07-06-2009, 01:57 PM
do you have a channel? the only one i had was the bestop one that used 2 "clamp" type things in the factory holes for the soft top.

is this just a strip with holes in it? if so you might have to drill

JBs X
07-06-2009, 06:10 PM
Yes I do have the channel and it is the type I have to drill. I just wasn't sure of the exact placement of the channel and what size screws I need. I might just break down and buy the Best Top one you have.

mxracer513
07-06-2009, 06:52 PM
I would just put the top in the channel, put it on where you like it, mark where it's at, take the top off, place the channel, and put in some nice looking self tappers fron lowes in to keep it on :) but if you want to buy the best top one i would be interested in the steel one :D.

tjblair
07-06-2009, 07:03 PM
If it is like the best top bikini top with the channel those strips or strip should be even with the top of the windshield and mounted to the inside of the windshield.

tjblair
07-06-2009, 07:14 PM
like this
http://i475.photobucket.com/albums/rr115/tjblair/P7060088.jpg

http://i475.photobucket.com/albums/rr115/tjblair/P7060087.jpg
:039: