PDA

View Full Version : Need (Got) a new front bumper



DeathBlade556
08-17-2009, 09:09 AM
Well my old bumper was rusting out, so now its time for a new one.
I saw 4WD has a procomp bumper for $86 anybody use this one before?
http://www.4wd.com/productdetails.aspx?jeep-sid=237&plID=720&partID=9763

The other option is to buy a stock replacement and new end caps, I think this one would protect the fenders a bit more. Would YJ bumper ends fit a TJ bumper?

I dont have time to build one so its one of the above.

john00TJ
08-17-2009, 03:58 PM
i have a stock TJ front bumper in good shape ,its yours if you want ..i dont have any end caps though

NeonRyder
08-17-2009, 04:00 PM
I have a stock TJ bumper with the endcaps and bumpers. Its a little bent, but I'll trade for a foot-long GetGo sub.

SirFuego
08-17-2009, 04:05 PM
Damn, I was hoping for a paint drawing of a bumper with a built-in easy bake oven powered by the Hella lights mounted to it.

gonecheenin
08-17-2009, 04:58 PM
Doesn't look like a bad pc at all for the money. I always hated the recievers placed low in the bumper though, ends up becoming a ground plow everytime.

DeathBlade556
08-17-2009, 06:20 PM
I Think might have to take you guys up the the stock bumpers, and I get some new rubber ends from 4wd.

Though there was this smittybilt tube bumper http://www.4wd.com/productdetails.aspx?partID=13295

Arg, decisions!

wozz
08-17-2009, 06:25 PM
tube bumpers bring the suck

limegreentj
08-17-2009, 06:34 PM
yeah i hate tube bumpers (like that) some of the smaller diameter tube bumpers are cool...oh yeah btw *cough* ibuildstuff *cough*

DeathBlade556
08-17-2009, 11:21 PM
OK so no tube bumpers, now its just a fight between the stock freebies, and the procomps.

DeathBlade556
09-02-2009, 06:48 PM
When to 4WD Friday and got this smitty built for $150ish now to just reattach the tow hooks and drill holes to but on the lights.
I found the pins in the shackles don't like to stay tight, locktite them or some cotterpins/wire?

http://i151.photobucket.com/albums/s156/DeathBlade556/DSCF6339.jpg

mbg
09-02-2009, 08:17 PM
New bumper looks good.

I just tighten the pins in the shackle by putting a screw driver through the eye of the pin and tighten it. It keeps it tight and hopefully deters someone from walking by and taking it off by hand.

mudforblood
09-02-2009, 08:35 PM
/\ /\ That's what i usually do also. Another thing to try if you don't want them cranked tight when your using them often is to put a rubber o-ring on the pin, between the pinhead and shackle. The rubber gives it something to grab onto.