PDA

View Full Version : Need some help



KUGS
06-08-2010, 12:09 AM
I have a chevy k3500 dump truck. The rear axle is a 14bolt. The ubolts for the axle/ spring a square and the treads are pointing down through a plate that curves around the axle tube but is rusted away. The deal said they are not avalable anymore. So i want to do (if i have the room behind the tires) is get the round ubolts and have them face up and through a plate the will pull everything together. Were can i find plates fo a 4'' tube? I tried sky Manf. bolt dont see anything on there website. Im sure someone has to make one.

jlovbasz3
06-08-2010, 12:18 AM
Call Uniontown Auto Spring Company (724) 437-7921 they will have what you need or can make it for you.

Dragonslayer
06-08-2010, 04:50 AM
Point spring and driveshaft on Neville Island should have them.

ridgerunner97
06-08-2010, 05:02 AM
Greensburg Machine and Driveline in Greensburg, Pa. They will be able to hook ya up i'd imagine.

Super Scout
06-08-2010, 06:35 AM
Commercial spring in New Alex will have what you need.

highlandercj-7
06-08-2010, 06:57 AM
Uniontown Spring is the best in the bussiness. Their Quality, Service and Price won't be beat. I went to Point for my D60 u-bolts (I was in the area of one of their stores) they wanted 90.00. That's insane I thought. I got them at Uniontown for less than half that.

joshs1ofakindxj
06-08-2010, 08:36 AM
If you're closer to Johnstown you can go to Cambria Spring Works in Hornertown.

john00TJ
06-08-2010, 09:30 PM
Rays Spring shop in mckeesport

KUGS
06-09-2010, 12:05 AM
Rays Spring shop in mckeesport

Unless its a big rig that guy is a jerk (at least from my dealings)
Thanks for the input i found what i want at WFO concepts
http://www.wfoconcepts.com/pr/Chevy-Dana-60-Front-U-Bolt-Plate/3203/3553/3559 two pass plates should work