PDA

View Full Version : 8.8 swap



sirboozin
03-14-2011, 01:33 PM
i got everything else done other than my coil buckets. what angle should my coil buckets be at? i have a 4 inch lift( 15 degree pinion angle). the directions that came with my bracket kit is set up for a stock jeep ( 6 degree pinion angle). the directions say with a stock jeep the buckets should be at a 3 degree angle.

atvboo
03-14-2011, 01:37 PM
I did mine on 0 degrees and I have a 4" lift not sayin that's right

MemorEsto
03-14-2011, 01:40 PM
If you have a SYE, point the pinion right at the TC. Do you have adjustable control arms?

sirboozin
03-14-2011, 02:02 PM
i dont have a sye or adjustable controll arms.

sirboozin
03-14-2011, 02:04 PM
I did mine on 0 degrees and I have a 4" lift not sayin that's right

do your coils bind up or have a bend in them ? iv been told to do it at 14 degrees and 7 degrees so i dont know what angle to put it at

atvboo
03-14-2011, 09:26 PM
i never really looked . i found a write up on the internet and just followed it.

oros35
03-15-2011, 09:25 AM
With the pinion angle set where it should be, I'd set the buckets at 0 degrees (parallel with the ground). A few degrees off one way or the other won't make a huge difference for the coil buckets, the pinion angle is the most critical.

sirboozin
03-16-2011, 09:26 AM
alright thanks