PDA

View Full Version : Any Honda Techs ?



Super Scout
01-16-2013, 06:35 PM
2003 CRV Check engine Light is on, wont pass emissions.
Pulled 2 codes p0497, and p0497 pd.
Any ideas, the one says low evap flow, but the other I can't find anything on, never saw a code with a PD before. Unless I am stupid and it is meaningless. Which pretty likely. Thanks.

88wd21
01-16-2013, 08:14 PM
All the "pd" means is its a pending code, otherwise I hate evap crap

flimmy
01-16-2013, 11:19 PM
Talk to DMG he helped on on my Tacoma. It had a few codes that I couldnt figure out. Now its ALL GOOD :080:

flimmy
01-16-2013, 11:19 PM
Forgot to say you might have to take it to his shop.

DMG
01-17-2013, 02:59 PM
Thanks, Scott.

I would locate the evap hoses and visually check for a kinked or disconnected hose. If ok, use compressed air to blow through the hoses/lines to clear them. Be gentle, don't use too much pressure. Also make sure the purge valve and other evap stuff is plugged in. Then clear the code and see if it returns.