PDA

View Full Version : Front Control Arm For A My Tj



creepyjeepy
05-28-2007, 06:11 PM
I Am In Desperate Need Of A Front Control Arm For A My Tj!!!!!!!!!!!mine Looks Like A Snake After Bidwell Today!please Help Asap...SORRY ITS NOT THE CONTROL ARM ITS THE TRAC-BAR
OK I LOOKED TODAY AND MY LOWER CONTROL ARM BRACKETS ON BOTH SIDES ARE SHIFTED TO THE RIGHT ABOUT 3/4 OF AN INCH!WHAT DO I DO WELD NEW BRACKETS ON OR GET A NEW HOUSING?I DONT TRUST IT TO JUST BEND THEM BACK...

limegreentj
05-28-2007, 11:37 PM
i might have a stock one...upper or lower? i dont know if it matters if its left or right or not but lemme know and ill see if i can dig one up

creepyjeepy
05-29-2007, 03:21 PM
trac bar please!!!!!!!!

andrew2516
05-29-2007, 03:35 PM
I have a stock trackbar and bracket for a cherokee if that will fit, $25.

oros35
05-29-2007, 03:38 PM
I've got a stock one, I'm bit far though.

creepyjeepy
05-30-2007, 10:08 PM
??

TimMichaels
05-30-2007, 11:35 PM
Bidwell.... the trail in Ohiopyle State Park?

Muzikman
05-31-2007, 12:48 AM
If that's the one...how the hell did you break anything on that trail? I had my X down there when it was totally stock.

gonecheenin
05-31-2007, 08:18 AM
Something doesn't sound right

More pics & explanation is required before hasty repairs are made

creepyjeepy
05-31-2007, 04:46 PM
i hit a rock REALLY hard with my passenger tire,goin' way to fast!

gonecheenin
06-01-2007, 08:17 AM
i hit a rock REALLY hard with my passenger tire,goin' way to fast!

Oh

I think I might have a stock ZJ trac-bar laying around

Not sure on the condition but if its definitely there you can have it if you wanna try it.

I'll look tonight

gonecheenin
06-01-2007, 08:21 AM
OK I LOOKED TODAY AND MY LOWER CONTROL ARM BRACKETS ON BOTH SIDES ARE SHIFTED TO THE RIGHT ABOUT 3/4 OF AN INCH!WHAT DO I DO WELD NEW BRACKETS ON OR GET A NEW HOUSING?I DONT TRUST IT TO JUST BEND THEM BACK...

Just straighten them up as best you can & if needed go over the welds.
Then plate the front for strength & better protection for next time.

No reason to replace the housing or the braklets unless they started to split or were just plain mangled beyond use, trust me your not the first one to bend up D30 LC brackets
(have a look at my ZJ if you don't believe me :081: )