I need a brake proportioning valve for drum rears, an alternator and a stock rear track bar. We put a 5 SPD in it and need to figure out a rear driveshaft. It was sugested maybe an MJ rear shaft? Thanks and let me know. Gary
I need a brake proportioning valve for drum rears, an alternator and a stock rear track bar. We put a 5 SPD in it and need to figure out a rear driveshaft. It was sugested maybe an MJ rear shaft? Thanks and let me know. Gary
Don't Believe Everything You See On The Internet.......Abraham Lincoln
Proud Heritage Region Jeep Alliance Member
95 XJ 5 spd, 3" coil 1 1/2 spacer- S 10 rear leafs,
Warn front winch bumper,
Magnum 9K winch,
D 44 track lock, Rock sliders
80 CJ 7 (a lot)
81 CJ 7 resurected Twice
06 Rubicon unlimited
3" lift & 33s
8274 winch
check on speedwaymotors.com for an adjustable proportioning valve
98 xj- project dad's baby hauler-3 inch skyjacker lift 31 inch at's custom bumper
00 xj- opposite sex-j or wife-j
97 tj-summer fun toy. 33's 4 inch lift custom tube fenders, custom armor and stuff.
Originally Posted by [B]dangerranger44[/B]
i know how the thornbirds suck offroad and all that. but they ride good and they make any truck look badass though.
Gee, it's a stock set-up, I was hoping to just put a used orig. on and go. I just can't seem to get a JY to get back to me about anything anymore. Thanks for the lead though
Don't Believe Everything You See On The Internet.......Abraham Lincoln
Proud Heritage Region Jeep Alliance Member
95 XJ 5 spd, 3" coil 1 1/2 spacer- S 10 rear leafs,
Warn front winch bumper,
Magnum 9K winch,
D 44 track lock, Rock sliders
80 CJ 7 (a lot)
81 CJ 7 resurected Twice
06 Rubicon unlimited
3" lift & 33s
8274 winch
Is there any difference between the stock ZJ one and a stock YJ one? I think I have a YJ one here somewhere..
i have two alternators here at my house collecting dust. autozone confirmed both good. one i know is a stock 90 Amp from a 96 I6 with only 120K on it, the other, i'm not sure of the amperage, year, or mileage, but i know its from a V8. they will both work on pretty much all PCM voltage regulated Jeeps. lemme know if you want one. i know i have at least two trac bars here too..
99 WJ 4.7, 545RFE, 247 - BB on 30s
95 ZJ 5.2, 46RH, 249 - BB on 32" BFG MT
02 WJ 4.7HO, 545RFE, 247 - stock but breaks the tires loose on the 1-2 shift
have no idea about crossing prop valves. I can't find them on the auto supermarkets sites. I PMed you Gary
Don't Believe Everything You See On The Internet.......Abraham Lincoln
Proud Heritage Region Jeep Alliance Member
95 XJ 5 spd, 3" coil 1 1/2 spacer- S 10 rear leafs,
Warn front winch bumper,
Magnum 9K winch,
D 44 track lock, Rock sliders
80 CJ 7 (a lot)
81 CJ 7 resurected Twice
06 Rubicon unlimited
3" lift & 33s
8274 winch
i have an alt. here. its good. let me know if you want it.
i also have a rear track bar for an xj...not sure if they are the same
98 xj- project dad's baby hauler-3 inch skyjacker lift 31 inch at's custom bumper
00 xj- opposite sex-j or wife-j
97 tj-summer fun toy. 33's 4 inch lift custom tube fenders, custom armor and stuff.
Originally Posted by [B]dangerranger44[/B]
i know how the thornbirds suck offroad and all that. but they ride good and they make any truck look badass though.
Got what I needed... Thanks again Gary
Don't Believe Everything You See On The Internet.......Abraham Lincoln
Proud Heritage Region Jeep Alliance Member
95 XJ 5 spd, 3" coil 1 1/2 spacer- S 10 rear leafs,
Warn front winch bumper,
Magnum 9K winch,
D 44 track lock, Rock sliders
80 CJ 7 (a lot)
81 CJ 7 resurected Twice
06 Rubicon unlimited
3" lift & 33s
8274 winch
not a problem... happy to help a fellow Jeep owner
99 WJ 4.7, 545RFE, 247 - BB on 30s
95 ZJ 5.2, 46RH, 249 - BB on 32" BFG MT
02 WJ 4.7HO, 545RFE, 247 - stock but breaks the tires loose on the 1-2 shift
There are currently 1 users browsing this thread. (0 members and 1 guests)