I'm looking to sell the body and bed of a Willys cj2a project I started.
What I have is a fiberglass cj2a body that has been cut down to be used as a truck cab and a fiberglass 2a hood. The body is a thin fiberglass race body with the dash built in. The body is fiberglassed back together, just needs some minor work at the back to finish.
The bed is a 1946 Bantam T3-C trailer. The floor was rusted out and has been removed. The tongue has been removed as it was rusted almost completely through in several spots. I have the fenders (one dented, one in good shape) and axle which appears to be in good shape.
Hoping to get $500 for the pair to recoup some of what I have into it.
Pictures can be found here: http://www.pirate4x4.com/forum/showthread.php?t=1010473
I also have a pair of D60s out of a 78 or 79(don't remember which) F350. The front is missing the driver side hub and caliper, other then that its complete. The rear is complete.
Looking to get $1000obo, located in Austintown Ohio (Youngstown).