Results 1 to 10 of 10

Thread: A spare rim and mounting kit -ZJ

  1. #1
    Less posting, more wheeling! JeepSteeler's Avatar
    Join Date
    Oct 2006
    Location
    Pine Twp
    Posts
    1,801

    A spare rim and mounting kit -ZJ

    I'm looking for a spare 15" rim, 5 bolt, that fits a 95 ZJ, as well as the mounting kit to affix the spare to the side of the cargo area. I have a tire, but I will take a rim even if it has a tire on it in any condition. Rim can be a 7" or 8" wide, doesn't really matter. Decent condition, as long as the rim is straight and will hold air.

    I will come and pick up anywhere in the Pgh area.

    Thanks!!!!!
    _________________
    06 XK 4.7 Limited- K&N FIPK, Mopar skids, Monroe Coil Over HD Shocks, Cooper Discoverer AT3's, relatively useless stainless bull bar.

    "Freedom is something that dies unless its used" -HST

  2. #2
    Less posting, more wheeling! mudforblood's Avatar
    Join Date
    Aug 2006
    Location
    Renfrew
    Posts
    1,668
    Is the metal bracket with a hole in it sticking out of your plastic where the tire goes? If that is there I have the j-bolt, cone and wingnut to hold it in. You can have it if you want it? The cover for the donut spare is laying around here somewhere if you wanted it for some reason.

  3. #3
    Less posting, more wheeling! gonecheenin's Avatar
    Join Date
    Aug 2005
    Location
    Vandergrift, PA
    Posts
    3,497
    If you need the bracketry & all i should still have it in my parts 95 in the driveway

    Got a donut spare for sure, and might have a couple old chrome rims you could use

    You should check that thing out, could have other stuff you could use
    _________________________________________________________________________
    If you break it, then it needed upgraded anyway!

  4. #4
    Less posting, more wheeling! mudforblood's Avatar
    Join Date
    Aug 2006
    Location
    Renfrew
    Posts
    1,668
    Quote Originally Posted by gonecheenin
    If you need the bracketry & all i should still have it in my parts 95 in the driveway

    Got a donut spare for sure, and might have a couple old chrome rims you could use

    You should check that thing out, could have other stuff you could use
    Does it have a clean rear hatch? that doesnt sound good, rephrase not rusted
    Last edited by mudforblood; 11-07-2006 at 07:58 PM.

  5. #5
    Less posting, more wheeling! gonecheenin's Avatar
    Join Date
    Aug 2005
    Location
    Vandergrift, PA
    Posts
    3,497
    Hatch is rusted on the bottom seam like most

    Other then that its pretty good
    _________________________________________________________________________
    If you break it, then it needed upgraded anyway!

  6. #6
    Less posting, more wheeling! mudforblood's Avatar
    Join Date
    Aug 2006
    Location
    Renfrew
    Posts
    1,668
    Do you think its repairable? mine has a nice half inch gap between the inner and outer skin at the bottom. how much for it?

    Dont you have it posted somewhere??

  7. #7
    Less posting, more wheeling! gonecheenin's Avatar
    Join Date
    Aug 2005
    Location
    Vandergrift, PA
    Posts
    3,497
    Somewhere, but i think it has the same gap on that seam

    I'll try to find the pic
    _________________________________________________________________________
    If you break it, then it needed upgraded anyway!

  8. #8
    Less posting, more wheeling! JeepSteeler's Avatar
    Join Date
    Oct 2006
    Location
    Pine Twp
    Posts
    1,801
    Yeah! I knew somebody would have this crap laying around. I need basically everything with the spare. I got the rubber mount pillar thing jutting out of the side of the cargo area, that's it. Right now I got a borrowed spare bungee corded on there and it sucks.

    Cheenin'...you got that 95....I would like to maybe scavange it a bit and definitely would take your spare mounting stuff...where U at? I'm booked this weekend, but after that I'm free on weekends pretty much until deer rifle season. I'm up in Ross near Ross Park Mall....

    Thanks for the offer MFB...

    BTW...I got the same little rust spot right on the hatch. Must be bad design.
    _________________
    06 XK 4.7 Limited- K&N FIPK, Mopar skids, Monroe Coil Over HD Shocks, Cooper Discoverer AT3's, relatively useless stainless bull bar.

    "Freedom is something that dies unless its used" -HST

  9. #9
    Less posting, more wheeling! gonecheenin's Avatar
    Join Date
    Aug 2005
    Location
    Vandergrift, PA
    Posts
    3,497
    I'm in Upper burrellm right outside New Kensington

    Come check it out if you want
    _________________________________________________________________________
    If you break it, then it needed upgraded anyway!

  10. #10
    Less posting, more wheeling! JeepSteeler's Avatar
    Join Date
    Oct 2006
    Location
    Pine Twp
    Posts
    1,801
    Will do. I'll shoot ya a message next week and figure out how/where to meet up. I know how to get to New Ken via Rte 28....after that I'm clueless.
    _________________
    06 XK 4.7 Limited- K&N FIPK, Mopar skids, Monroe Coil Over HD Shocks, Cooper Discoverer AT3's, relatively useless stainless bull bar.

    "Freedom is something that dies unless its used" -HST

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Powertank & Mounting Bracket
    By Bill in forum Items For Sale
    Replies: 1
    Last Post: 05-05-2011, 10:32 PM
  2. shock mounting 101
    By muddeprived in forum General Off-Road Discussion
    Replies: 5
    Last Post: 07-15-2010, 12:05 PM
  3. Need help mounting tow hooks
    By Dick.Breakey in forum Fabricator's Corner
    Replies: 45
    Last Post: 03-25-2010, 11:58 PM
  4. Mounting CD changer
    By Happycamper in forum General Off-Road Discussion
    Replies: 12
    Last Post: 03-25-2005, 09:51 PM
  5. mounting tires
    By Happycamper in forum General Off-Road Discussion
    Replies: 9
    Last Post: 02-17-2005, 06:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •