'04 Jeep Wrangler Unlimited (LJ)
Got an annoying squeak that seems to be coming from the area of the transfer case at the front drive shaft.
U-joints seem OK (visual, no play in them)
Maybe a bad seal?
'04 Jeep Wrangler Unlimited (LJ)
Got an annoying squeak that seems to be coming from the area of the transfer case at the front drive shaft.
U-joints seem OK (visual, no play in them)
Maybe a bad seal?
···╔════════╗
·█╢░░░░░░░░╟█
·._├────────┤_.
╘╕Θ║║║║║║║Θ╒╛
═══╩╩╩╩╩╩╩═══
Hyper..... or, just call me Tim
'13 Jeep JK Wrangler (his)
'16 Jeep KL Cherokee Trailhawk (her's)
Jeep Ambassador to the FJORC
„ɹǝʇʇods ʎɯ ǝɯɐןq ˙˙˙˙sıɥʇ pɐǝɹ uɐɔ noʎ ɟı„
The CV in the front shaft will do that.
Last edited by hyperbuzzin; 12-13-2015 at 09:33 PM.
···╔════════╗
·█╢░░░░░░░░╟█
·._├────────┤_.
╘╕Θ║║║║║║║Θ╒╛
═══╩╩╩╩╩╩╩═══
Hyper..... or, just call me Tim
'13 Jeep JK Wrangler (his)
'16 Jeep KL Cherokee Trailhawk (her's)
Jeep Ambassador to the FJORC
„ɹǝʇʇods ʎɯ ǝɯɐןq ˙˙˙˙sıɥʇ pɐǝɹ uɐɔ noʎ ɟı„
That double cardon joint has a bearing in the center that should be greasable with a needle adapter. Give it a try.
Install the shocks and the squeak will go away.
"You can't polish a turd but you can roll it in glitter"
Hoping that will do it. If beyond greasing, I take it that it's rebuildable with new U-joints (and the bearing?)
LOL.... probably shoulda done those this past weekend with the nice weather, but I had a 2 day "Personal Protection Inside The Home" gun class already scheduled.
Soon Chris.... soon!!
···╔════════╗
·█╢░░░░░░░░╟█
·._├────────┤_.
╘╕Θ║║║║║║║Θ╒╛
═══╩╩╩╩╩╩╩═══
Hyper..... or, just call me Tim
'13 Jeep JK Wrangler (his)
'16 Jeep KL Cherokee Trailhawk (her's)
Jeep Ambassador to the FJORC
„ɹǝʇʇods ʎɯ ǝɯɐןq ˙˙˙˙sıɥʇ pɐǝɹ uɐɔ noʎ ɟı„
There are currently 1 users browsing this thread. (0 members and 1 guests)