The black(brown) driveshaft is from the front of my jeep and the grey one is from a ZJ...I'm going to have the black one extended and the grey one will be going in the front.
The black(brown) driveshaft is from the front of my jeep and the grey one is from a ZJ...I'm going to have the black one extended and the grey one will be going in the front.
00 Cherokee Sport
__________
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
Everything is looking great! glad I could help with the drill, served me well on my LA install.
1980 CJ-7 304 TH400 BW1339
1999 TJ Sport 4.0 32RH NP231
2001 XJ Sport 4.0 AW4 NP231
Did I understand correctly, you need to shorten the hardlines an flare the ends? I have a flaring tool an stuff, but you can "borrow" one from advance auto or autozone.
"Blue Ox" '95 F-150: 300-6, 5-spd, 4x4, "slightly modified"
"lil Blue" '00 Ranger Supercab xlt: 3.0L, 5-spd, 2wd, dark blue, blacked out
'89 Bronco II Choptop: 4.0L, 5-spd, 4x4 convert., 5" susp. lift, 2" BL, locked, 35's, blue camo
'88 Bronco II Eddie Bauer: 2.9L, auto, 4x4, mods in the works
auto zone rents/sells tools you pay for them and get your money back upon return.but the tools are usually junk. if you cant get it to flare napa in nk sells steel compresion fittings that you can use the key word is steel
Yea, but FYI, it's a bit tricky to get the flares right, I spent a bit of time messin with 'em. I may be able to stop an lend a hand if you need it, I"m gonna be home for spring break, headin home tomarrow night.
"Blue Ox" '95 F-150: 300-6, 5-spd, 4x4, "slightly modified"
"lil Blue" '00 Ranger Supercab xlt: 3.0L, 5-spd, 2wd, dark blue, blacked out
'89 Bronco II Choptop: 4.0L, 5-spd, 4x4 convert., 5" susp. lift, 2" BL, locked, 35's, blue camo
'88 Bronco II Eddie Bauer: 2.9L, auto, 4x4, mods in the works
Andrew, I might be able to 'borrow' our flarring kit from work.
Also, are you and jay coming with us sunnnday??
00 Cherokee Sport
__________
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
did you get that front axle today?
1980 CJ-7 304 TH400 BW1339
1999 TJ Sport 4.0 32RH NP231
2001 XJ Sport 4.0 AW4 NP231
I'm having them pull it because I don't want to play around in the mud. The guy said he has 3 engines he has to pull before he will get to it so he said it should be out either today or tomarrow.
It's from a 96 auto without a hitch or skid plates or tow hooks. The only thing I forgot to look at was the engine. It was pouring and I guess i was in kind of a hurry, but I figure in the worst case I'll have to gear deeper to 4.10's if its a 4cyl.
That was the only newer axle I could find...the one 97 had both knuckles busted off of it from moving it around and the other was already gone.
Last edited by andrew2516; 03-15-2007 at 12:04 PM.
00 Cherokee Sport
__________
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
sounds good, what color was the Jeep? They had an old white one there with a brand spankin new AW4, really bugs me I never took that.
1980 CJ-7 304 TH400 BW1339
1999 TJ Sport 4.0 32RH NP231
2001 XJ Sport 4.0 AW4 NP231
Picked up the HP30 today out of a 96'...I paid $150 for it. The one side looks like it has newer balljoints and the other side is missing the greese/dust boot but the ball joints look a lot better than mine do. It also has the better 297x joints. I'll be swapping over my Timken bearings and cutting off the passenger uca.
00 Cherokee Sport
__________
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
Nice!!!
Do you know what gears you got in it?
If your gonna loose the pass. side UCA I would suggest upgrading the driver side upper bolt to something bigger. I dunno what is available but one 3/8" bolt holding the axle from flipping forward seems weak. IMO only.
tag reads .55, so I would assume its 3.55's. nice find.
1980 CJ-7 304 TH400 BW1339
1999 TJ Sport 4.0 32RH NP231
2001 XJ Sport 4.0 AW4 NP231
Yeah, I'm going to try and run 3.55's for now until I regear. The 3 is there the paint was just coming off alittle.
As for the UCA bolt...I know I'll be replacing the bushing and I think the bolt is bigger than stock but I'll have to check on that.
I ended up taking the arms off of it pretty easily ...I thought it was going to be alittle hard.
00 Cherokee Sport
__________
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
sick dude.
LMK when the LA install happens.
Women have clothes and shoes....we get welding and tools!....and the women!
Well today I got a lot done...I trimmed the front fenders, relocated the vacuum ball and painted the axles
I also got the upper control arm mount for the passenger side cut off yesterday and I got the UCA bushing on the drivers side out last sunday...everyone complains about the UCA bushing being hard to get out...I ended up getting mine out in about 10 minutes
It's slowly coming along! My coils are on backorder, and summit won't get them in until april 4th
Last edited by andrew2516; 03-23-2007 at 08:02 PM.
00 Cherokee Sport
__________
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
Sweet!! Looks good!!
"Some people are like Slinkies - not really good for anything, but you still can't help but smile when you see one tumble down the stairs."
cool
I really dig the front fender treatment
_________________________________________________________________________
If you break it, then it needed upgraded anyway!
I have to say that Jeep looks 10x better than those pics show, Andrew you should have taken a pic of the front end all finished up.
1980 CJ-7 304 TH400 BW1339
1999 TJ Sport 4.0 32RH NP231
2001 XJ Sport 4.0 AW4 NP231
That does look like some serious progress in the right direction for them 36's
Glad to see another Jeeper thats not afraid of the old spin-saw. Cut it up!
Damnit I need to get some free time to get summer projects going...those axles are making me jealous.
Women have clothes and shoes....we get welding and tools!....and the women!
Ordering some 6.5" leafs on friday with 6* shims and grade 8 u-bolts!
I'll have to snap some pics of the front end after I get the door trim on those cut edges.
00 Cherokee Sport
__________
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
Well it was so nice out today! I got the 8" coils from UPS and I also got the 34"s on...I ended up having to change the passenger side unit bearing on the D30 thats in my jeep right now because it was really bad.
00 Cherokee Sport
__________
/__l_l_,\____\,___
l_---l_l__l---[ ]llllll[ ]
_.(o)_)__(o)_)--o-)_)
There are currently 1 users browsing this thread. (0 members and 1 guests)