Page 1 of 2 12 LastLast
Results 1 to 25 of 26

Thread: Axles where to get them?

  1. #1
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548

    Axles where to get them?

    I was cleaning the mud of the under carrage today with the pressure washer and is seams my rear pinion seal is leaking again, second time this year. And since I'm going to be putting on the lift I said frak it! ford 8.8 time! now just were to get it? I keep on hearing about a yard around here that had $75 axles, my local yard wants $250 for it. I can copy the current brackets on the D35 out of some 3/16ths. (plasma cutters are great)

    So were is this mystical cheap axle yard?
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  2. #2
    Trail Leader
    Join Date
    Sep 2008
    Location
    Tarrs
    Posts
    408
    maybe u pull it, near perryopolis

  3. #3
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    You mean here?

    Bob Cossell's U Pull It

    (724- 529-2995)
    885 Banning Rd
    Dawson, PA 15428
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  4. #4
    Trail Leader
    Join Date
    Sep 2008
    Location
    Tarrs
    Posts
    408
    thats the right number, i know they had some grands out there also, they have 44's in the rear i think. might be worth it also. not sure on price give em a call in the a.m.

  5. #5
    Official PghOffRoad Post Whore!
    Join Date
    Apr 2009
    Location
    Indiana, Pa
    Posts
    5,772
    Problem with the grand 44s are that they had Aluminum center sections, hardly any support for lockers iirc they are a lil different than other 44s. Do an 8.8 and be done with it. Hopefully Matt or Jared can chime in about the ZJ and WJ 44s, they would know more about em for sure.
    97 XJ Clayton Longarms 35s locked etc.
    94 YJ MTO
    98 5.9 ZJ Limited alllll original
    02 Cummins 6spd HO Studs, Sticks, Box, Pump...

  6. #6
    PghOffRoad Forum Addict!
    Join Date
    Sep 2005
    Posts
    1,462
    Quote Originally Posted by DeathBlade556 View Post
    You mean here?

    Bob Cossell's U Pull It

    (724- 529-2995)
    885 Banning Rd
    Dawson, PA 15428
    Its Strauss now and you`ll be hard pressed to find what u need there IMHO..
    vendors that did me right during my build .check them out

    [URL]http://rockstomper.com/[/URL]
    [URL]http://www.ballisticfabrication.com[/URL]
    [URL]http://www.foothillmotorsports.com[/URL] best deal on super swampers
    [URL]http://www.kore4x4customs.com/[/URL]
    [URL]http://www.ruffstuffspecialties.com/[/URL]
    [URL]http://polyperformance.com/[/URL]
    [URL]http://www.completeoffroad.com[/URL]

  7. #7
    PghOffRoad Forum Addict!
    Join Date
    Jul 2008
    Location
    Belle Vernon
    Posts
    1,009
    Murphy's Auto Wreckers (724)-628-1610 I was just looking at on on Monday 2nd gen V8 exploder.They are about 3-5? miles away from Sechrist/Strauss.
    Last edited by jlovbasz3; 06-26-2010 at 01:38 AM.
    [URL]http://www.youtube.com/watch?v=8gD5vDm_Cx0[/URL]

  8. #8
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    Cossells/Strauss qouted me "its either $50 or $85"
    Danser's quoted me $100

    Anybody want to go?
    Last edited by DeathBlade556; 06-26-2010 at 10:39 AM.
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  9. #9
    PghOffRoad Forum Addict!
    Join Date
    Feb 2008
    Location
    Dawson, PA
    Posts
    643
    edit ^ lemme know if you need a hand..
    i know any axle from Cossels/U-Pull-It/Strauss is $100, i just got my front Dana30 from there.. you can call and they will tell you any price you want.. 724-529-2995 is correct.. the only thing is you have to go pull it yourself... any other info you need to know just ask.. i am out there at least 3 times a week.. there are quite a few grands an one very nice 5.9 out there by the way..
    99 WJ 4.7, 545RFE, 247 - BB on 30s
    95 ZJ 5.2, 46RH, 249 - BB on 32" BFG MT
    02 WJ 4.7HO, 545RFE, 247 - stock but breaks the tires loose on the 1-2 shift

  10. #10
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    I wonder what they would want for it?
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  11. #11
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    Well I'm probably going down there on Tuesday in the morning to get an axle, and see about an engine I've had it up to "Here" with the 2.5L
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  12. #12
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    After a 50 mile drive and 4 hours under the sun the 8.8 is mine!

    Scored one with 3:73 and a track lock diff! (atleast I hope its 3:73 and not 2:73 the tag was very rusty)
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  13. #13
    Official PghOffRoad Post Whore!
    Join Date
    Apr 2009
    Location
    Indiana, Pa
    Posts
    5,772
    AFAIK they didn't come with 2.73 so you should be GOLDEN!
    97 XJ Clayton Longarms 35s locked etc.
    94 YJ MTO
    98 5.9 ZJ Limited alllll original
    02 Cummins 6spd HO Studs, Sticks, Box, Pump...

  14. #14
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    Not Golden at all!

    I was cleaning it up and broke out my stripped bolt sockets and was able to get the last 4 bolts out and took the diff cover off, Ring gear is all is chewed up frak! Now I got to put gears in it!
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  15. #15
    Official PghOffRoad Post Whore!
    Join Date
    Apr 2009
    Location
    Indiana, Pa
    Posts
    5,772
    SON OF A BITCH!!! That is the worst feeling in the world when you go to pull a diff cover and SURPRISE! That sucks man sorry to hear that.
    97 XJ Clayton Longarms 35s locked etc.
    94 YJ MTO
    98 5.9 ZJ Limited alllll original
    02 Cummins 6spd HO Studs, Sticks, Box, Pump...

  16. #16
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    All because I forgot my damn metric sockets, I stripped some of the diff cover bolts and only got them out at home. Need to remember my stripped bolt sockets next time.
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  17. #17
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    Ok now the big question, should I go find another axle with good gears(around $250) or start cleaning this one off and put new gears in it?(gears $180-$245 + labor)

    Second thought if anybody needs a 8.8 with 4:10s or other non-stock gearing I'll clean this one up and get it ready to install in trade for a 8.8 with good 3.73s
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  18. #18
    Trail Leader
    Join Date
    Jun 2007
    Location
    Fox Chapel, PA
    Posts
    291
    There's a Strauss U pull it at west alexandria exit off rt70 near washington, pa. I just grabbed a center console out of an explorer for my raider the other day. they have at least four 90s ford explorers, and a couple older fullsize trucks.
    Eric

  19. #19
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    Ok honest opinions guys.

    Should I rebuild this axle, its needs ring, pinion, and bearings (if I get the bearing/gears(used) on ebay its about $150, the axle cost $125). Or should I go out and get another one with good gears($125-$250)?
    Last edited by DeathBlade556; 07-10-2010 at 05:47 PM.
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  20. #20
    PghOffRoad Forum Addict!
    Join Date
    Sep 2005
    Posts
    1,462
    find another used one and yank the diff cover first
    vendors that did me right during my build .check them out

    [URL]http://rockstomper.com/[/URL]
    [URL]http://www.ballisticfabrication.com[/URL]
    [URL]http://www.foothillmotorsports.com[/URL] best deal on super swampers
    [URL]http://www.kore4x4customs.com/[/URL]
    [URL]http://www.ruffstuffspecialties.com/[/URL]
    [URL]http://polyperformance.com/[/URL]
    [URL]http://www.completeoffroad.com[/URL]

  21. #21
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    So one vote for new axle anybody else?
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  22. #22
    Noob!
    Join Date
    Jul 2010
    Location
    Lower Burrell, Pa
    Posts
    12
    Wish i'd have read this a week ago, just got my 8.8 from saxonburg auto wreckers. Came with poo3.55 and open diff. Woulda def bought yours if i had known. worked out though, got rebuilt limited slip, gears, and axle rebuild kit from a friend for $250.

  23. #23
    Noob!
    Join Date
    Jul 2010
    Location
    Lower Burrell, Pa
    Posts
    12
    As far as getting another axle, i'd say go for it, If you can find one. I had a hard time getting the people at the yards to find out what gears were in them and if they had a LS, just ended up getting what was close and convenient.

  24. #24
    Less posting, more wheeling!
    Join Date
    Aug 2007
    Location
    Ambridge/Pittsburgh, Pa
    Posts
    1,548
    So if anybody is going out to to strauss or another $100 axle yard, could you look out for an explorer with the axle codes 46, D4, or L73

    The finders fee of a case of your favorite beer
    [I]"Its not a bondfire unless you can see if from space"[/I]\
    TJ now with the power of a 5.2L vs 2.5L get same gas mileage....crap.

  25. #25
    PghOffRoad Forum Addict!
    Join Date
    Jul 2008
    Location
    Butler
    Posts
    580
    Gabe......you are polishing a turd. Bad axles, under powered troublesome motor, etc. What you need is a nice built XJ. Do you know how many guns and cases of Tannerite you can haul in one of those??
    Hollow points...........when you care enough to send the very best.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Axles need gone
    By KUGS in forum Items For Sale
    Replies: 0
    Last Post: 09-13-2011, 08:16 PM
  2. Axles
    By Megamus in forum Items Wanted
    Replies: 8
    Last Post: 09-15-2009, 04:20 PM
  3. TJ axles
    By twinsticker88 in forum Items Wanted
    Replies: 1
    Last Post: 07-10-2009, 06:17 PM
  4. Axles
    By CESCO in forum Items For Sale
    Replies: 0
    Last Post: 05-18-2009, 04:46 PM
  5. D35 Axles
    By Sp71Supra in forum Items For Sale
    Replies: 3
    Last Post: 03-14-2008, 11:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •