We are trying to make something fit.
We are trying to make something fit.
I can next time im up the garage, but IIRC the V8's and I6's are different.
1980 CJ-7 304 TH400 BW1339
1999 TJ Sport 4.0 32RH NP231
2001 XJ Sport 4.0 AW4 NP231
what are you trying to fit in there man?
-Olive Drab '92 YJ 2.5L 4 cyl. 5" of Lift on 31s
-Red 95' Ford Mustang 3.8L V6
[URL]http://www.facebook.com/s.php?init=q&q=Josh%20Smith&ref=ts&sid=08224d5b5a2d538d53383c6dc50e92aa&n=-1&o=4&hash=386f3c35d984fbab966f16b2e50c02a4&sf=p&s=40#/profile.php?id=1715834776&ref=profile[/URL]
PM from [B]Gibson[/B]:
" **** off you donkey fistting pedofile "
CJ V8 just has one more row in it. should be able to get some measurements, didnt 2k2wranglerx have a YJ with the CJ clip he may have some insight on your issue?
88YJ with some stuff
74 cj5. 360 powered!
F150 ecoboost.
24 3/4" wide and 20 1/8" tall. Thats a 82 6cly CJ8 rad.
you can cut out the area behind the passengerside light bucket with no ill effects (i had to do it on both sides). If you cut that side out, you can probably shift the rad over enough to clear the steering.
taking unsafe rigs to a whole other level
Heres a link for Eviltwin V2 thread for what he did to fit the CJ clip on a YJ. About half way down you see it. And Im sure you can Pm him and get any info you would need. http://www.northeastcrawlers.com/nec...?t=5069&page=5
Mine is about the same, however the bottom is shaped with the corners raised like this... ----\_____/---- so the height at the sides is about 1/2 or 3/4 less than the 20 1/8 in the center. I can get a better measurement or pics if you think it will help. My rad is a 3 core for an AMC V8. I'm almost certain it was from 4wd and that was about 5 years ago.
It's not illegal, it's frowned upon.
There are currently 1 users browsing this thread. (0 members and 1 guests)