im curious if anyone has, or knows anyone with the equipment to turn down a piece of solid steel stock to a certain diameter for me. this is going to be the hinge pivot on my swing-a-way spare tire carrier. similar to the warn design, i need to have the piece of solid stock (hinge spindle) machined to a close tolerance to fit inside a piece of structural tubing which will be capped and set on top of the spindle. if you, or anyone you know can help me w/ this...please let me know.
the finish product will be somewhere around 1 3/4" in diameter and around 4" long, with a step at the bottom for the tubing to rest on. im sure this will make for an interesting write up once im finished...pix are sure to follow...
thanks,
-steve